• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners have to follow a series of unique steps to add a second ignition key. This requires the use of a handheld computer called Tech-2, to be used by the dealer. Then a new car key and transponder are required to be purchased and then programmed into the car.

It is an excellent idea to rotate your keys so that one does not wear out faster than the other. This will help to keep your keys in top condition.

Replacement Case

As opposed to the traditional saab replacement key keys of the past keys, the latest key fobs have electronics inside which makes it difficult to duplicate. This has made theft of cars much more difficult than it was twenty years ago. However, it has made replacing lost keys a comparatively expensive endeavor.

Saab 9-3 owners must have two keys working. It is expensive to replace a lost key as it requires replacing the CIM module, and changing the locking cylinders. Dealers will typically charge $100-$200 to complete this.

There are ways to avoid the high cost. Some parts providers will find the code on an extra key (usually the same one that opens the doors and turns the ignition) and cut a brand new key blade from metal for Saab 9-3 Key Replacement a fraction of the dealer's cost. The key, however, must be the same as the original one to function properly in your car.

You can also replace the case yourself by following these steps. You'll need a flathead screwdriver as well as some patience. With the screwdriver you can pull away the plastic and take out the emergency key. Once the case is open take out all electronic components and put them back in the new case. Put the correct key and badge inside the case.

Replacement Battery

The replacement battery for the Saab 9-3 is a low-cost part that can be replaced easily and quickly. This DIY video from YouTube Cyclone Cyd shows how to replace the battery in the remote key fob in only four steps. This tutorial will work with any modern Saab key fob. However, the procedure could differ slightly.

The first step is to find the button that opens the backup key inside the fob. This is usually located near the Saab logo on the back of the fob. Then take a flathead screwdriver into the tiny hole in this button. This should be enough to open the case of the fob so that you can replace the battery.

After the new battery CR1632 is installed then you can reassemble your remote key fob, and then program it to your car. The entire process should take no more than a half hour at the most. It's a simple process that does not require any special equipment.

If you lose your key, the procedure will be somewhat more complex however it can be completed. The dealer has to first verify the VIN of the vehicle and order an additional TWICE module and key blade that is matched to the unique code. Then, they'll have to cut the new key and then program it with a brand new tool for programming called MDI.

Replacement Key Fob

The key fob is the piece that locks and unlocks your car, it's got a battery within. Batteries have a limited lifespan and will eventually die. It's a common issue in all vehicles. The good news is you can change the batteries in most key fobs, without having to replace the entire case. Amazon sells replacement fobs that have all the electronics in place. You can simply remove the case and replace the batteries. It's important to note that you'll need take out the emergency key first, and you can accomplish this by inserting the screwdriver of a small flathead into the slot located in the middle of the case. Move the screwdriver around the case until it will split open, making it easier to remove.

When you're ready to replace your keys, ensure you have a spare, as this can reduce the total cost by a substantial amount. If you have spare keys, you can request that the dealer cut an additional key and program it to your car, which is much cheaper than replacing the whole key fob.

If you do not have a spare key, it is possible to add another key to your car, however this will require a lot of research and effort. It costs around a hundred dollars to purchase a second car key. The computer in the car must also be programmed. This can be done by a professional, but it is an expensive option for most owners.

Replacement Ignition

The modern SAAB 9-3 has an alarm system that is more sophisticated based on a key code. This means that if you lose your only working key, replacing it with another key can be extremely expensive since the car has to have a specific computer module installed, and it must also be designed to accept a different key. Dealers can charge hundreds of dollars to program an additional key if they are unable to complete the task.

Dealers will charge you top dollar to replace your car computer (also known as the CIM or SAAB twice) If you lose your only functioning key. Instead we can reprogram the EEPROM in your current car computer, preparing it for a new key, slashing over 50% of the price you have to pay at a dealership.

If you have owned a Saab 9-3 Key Replacement 9-3 an extended period of time you're aware that the ignition keys are not very durable. If the ignition key you have isn't functioning properly, it is time to think about replacing it. They can become very sticky and the buttons have been known to fall off. It's not so difficult as it may seem to replace the ignition key. With the right tools, it can be done quickly.