• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. They don't rot or rust like aluminum and timber.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will help prevent unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge amount of damage to your home, which can make it very dangerous and potentially fatal. You should take the time to make sure that your windows are in good working order.

For single pane windows it can be relatively simple to replace windows, and the new one will generally fit within the frame that was previously installed easily. If you have double-paned windows which are joined by internal beading, it is harder to remove and replace the old panes. In this situation you'll need to source some plastic spacers that aid the new pane in being able to fit correctly into the window frame.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass yourself. You should also lay down a dropcloth prior to you begin working on the window panes so that any shards of glass fall onto the fabric and not on the floor and could be trampled under.

It's a good idea to tape the gap once the glass has been removed. This will stop drafts and water from getting into your property until a professional comes out to repair the window. This will also act as a barrier, preventing any intruders to gain access to your home. If the gap is particularly large, you might want to consider using an alarm door that comes with an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash windows. In time, they could develop a number of problems such as sliding. A sagging uPVC window can cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it is important to act swiftly to stop the issue from becoming worse.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to unblock the windows so you can access the frame. With an screwdriver, remove the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you have relocated your hinges. If you're happy with the fit, tighten the screws until they remain in the right place.

If you are unable to reposition the hinges, you might require replacing the seal. Seals made of rubber can dry out and lose their elasticity with time, leading them to lose their tightness. If this happens, it's essential to replace the seal as soon as possible to ensure your uPVC windows are waterproof and secure from draughts.

upvc window repairs handles can also loosen up. This is typically caused by screws that have been removed over time, but it can be due to the mechanism of the handle wearing out. Fortunately, it's easy to fix a loose uPVC window handle yourself. You'll first need to close the window and perform a test fitting. The corners of the sash need to be aligned with the casing joint. If it isn't then you can make use of a screwdriver to loosen the handle, and then turn the mechanism back into position.

3. Water Leaks

If you wake up to damp floors and mouldy walls every time it rains it's important to take action. The leaks of water through windows could cause structural damage to your home and impact your ability to regulate the temperature of your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame is damaged or not present.

This is a relatively easy fix and should be undertaken by any DIY expert. Depending on the severity of the issue is, the old caulking may have to be removed. It is essential to remember that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and can reduce your energy efficiency.

Make sure that the drainage holes are free of debris in them, and also that the sill pan has been properly angled to drain away from the window. In more severe cases, you may need to replace the window.

Other indicators of water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. The mold thrives in damp environments and is able to quickly spread throughout the house.

It is also important to note that if the leak is coming from between the glass of your double glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open or if it opens with an ease. Anyone with the skills to fix them can replace hinges in just a few minutes.

Like any mechanical component hinges will wear out over time. It's easy to change a window hinge, but it's simpler if you have someone to help you hold the frame.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The problem with the hinges on windows could be caused by improperly opening the window in a certain way or due to poor installation at the factory. Sending us a picture via our website will often solve the issue. We are always happy to give suggestions.

It is also important to grease the hinges regularly. Applying an engineering lubricant that is light to the hinges is a great method of doing this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more easily. It can also stop corrosion and reduce the risk of sticking. This is recommended to be done at least once a year. WD40 and other solvent based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different things. The hinges, also because of wear and tear, can become misaligned, this causes gaps to develop where the sash meets the frame. They can be fixed by giving them a good clean, but when they're beyond repair, it might be necessary to get them realigned or replaced. The second is the interlock, which is located on the hinge of the window, can also become misaligned, again it may be possible to just give them a good clean, but in certain cases, it may be necessary to have them replaced.

The seals may wear out or get damaged over time, allowing air escape. Replacing these with high-quality weatherstripping can help stop draughts. Replace the upvc windows with low-emissivity glasses. This will help to regulate indoor temperatures and lessen draughts.

The final method to cut down on drafts effectively is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler that can be hung over your window repairs near me sill. These will help to block out cold air and keep your home warm and cozy!

The windows made of upvc can keep providing excellent insulation and security in your home with a little regular maintenance and repairs. It is crucial to recognize that windows last for a certain period of time and eventually, they will reach a point where it is more efficient to replace them than fix them. If you are having issues with your upvc windows, it is always best to seek professional assistance as soon as possible.